All current reference photos with descriptions. I will break down in section also as the build goes along.
…arranged newest to oldest…
Please note that you can click on the pics for a larger view, but must use your browser “Back” button to return to the page to continue.

Tailgate before removing vinyl letters and hand painting.

Rear CPP sway bar installed

New coil springs cut

New drop spindles and springs installed.

Takes some grinding on the A arm to clear interferences.

New drop spindles installed

New drop spindles arrived

Changing out the A-arm shafts and ball joints.

Old spindles and drop springs coming out.

Old spindles ready to be removed.

New replacement master cylinder installed.

Bench bleeding new brake booster.

Coming apart

Front suspension work to begin

Original calipers.

New trailing arm bushings installed.

Replacement Rear control arm bushings

Original trailing arm bushings removed

Somernites Cruise with the Kentucky C10 Club

New wipers arms installed

QuickJacks

Rebuilding the Jeep wiper arms

Cruise on Chiles

Southeast Christian Car Show

A couple of the grand boys playing in the bed

Cruisin' to a cruise

Glasgow Cruise

Just hangin' in the shade

Door panels installed

Door panels installed

Central Garage Cruise

Cruisin'

We'll wear these for a while. A short while.

New wheel adapters allow more options with what I already have for the wagon.

Drive-by line-up for grandson's birthday

Too cold. Time to get the correct plugs. These were with the motor when I got it anyway.

New plate

Just realized I had the MAF installed backwards

Updated wheel caps installed

Wheel with new centers

Wheel center stickers attached.

Stock wheel centers

Custom stickers for wheel center caps arrived.

3" front - 3" rear lowering coil springs. Much better.

A little aftermarket bling.

After I replaced the rear 5" with 3" springs.

Sway bar retrofit

Sway bar retrofit - Fabricated brackets.

Sway bar retrofit

Sway bar retrofit

Sway bar retrofit

Cleaned up an painted Bushing brackets

Finished brackets before paint.

Finished brackets before paint.

Aligning the plates for drilling.

Front coil springs removed.

After 3" front, 5" rear coils installed.

Finishing up the rear suspension.

Finishing up the rear suspension.

The wear on these newer brake pads is the reason the rear axle needed to be replaced.

Plain yellow shocks just don't get it.

New rear Yukon axle kit.

New rear Yukon axle kit.

replacing the bearings and seals

replacing the bearings and seals

New axle shafts installed.

no turning back now... this original ain't goin' back in now...

old worn, heated springs have gotta go

Just a little damage

Just a little damage. The worst of 3.

Tearing it apart.

This new belt will get rid of that pesky squeak...

Measuring for correct drop springs. This would be stock height according to online info.

Measuring for correct drop springs. This would be stock height according to online info.

Some shots taken at a professional phot shoot that I crashed.

Some shots taken at a professional phot shoot that I crashed.

Some shots taken at a professional phot shoot that I crashed.

Some shots taken at a professional phot shoot that I crashed.

Twins!

About ready to go in.

Bad one ready to come out

Time to get this one out of the way.

Pretty clean for early 2000s motor

Getting some paint on her

Clean, Clean, Clean...

Broken exhaust stud. Couldn't seem to get a weld to stick , so I drilled, tapped and put in a helicoil

After a good soaking and power wash.

This looks like a good replacement.

Some Purple Power and a power wash should do wonders...

Fresh outta the yard...

What's that noise? Not good.

Central Garage cruise.

Sonic Drive-in Cruise-in

Sonic Drive-in Cruise-in

Sonic Drive-in Cruise-in

Sonic Drive-in Cruise-in